The below information is advice only.
18 - 35mm Hardboard Discs sold in quantities of 50/100 - usual pin size 32mm/1.25" - Use M3 Nut & Bolts
38 - 76mm Hardboard Discs sold in quantities of 10/50/100 - usual pin size 44mm/1.75" - Use M5 Nut & Bolts
M3 = 3mm centre hole for all pins and M3 nut and bolts
M5 = 5mm centre hole for M5 nut and bolts
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
The below information is advice only.
18 - 35mm Hardboard Discs sold in quantities of 50/100 - usual pin size 32mm/1.25" - Use M3 Nut & Bolts
38 - 76mm Hardboard Discs sold in quantities of 10/50/100 - usual pin size 44mm/1.75" - Use M5 Nut & Bolts
M3 = 3mm centre hole for all pins and M3 nut and bolts
M5 = 5mm centre hole for M5 nut and bolts
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
The below information is advice only.
18 - 35mm Hardboard Discs sold in quantities of 50/100 - usual pin size 32mm/1.25" - Use M3 Nut & Bolts
38 - 76mm Hardboard Discs sold in quantities of 10/50/100 - usual pin size 44mm/1.75" - Use M5 Nut & Bolts
M3 = 3mm centre hole for all pins and M3 nut and bolts
M5 = 5mm centre hole for M5 nut and bolts
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
The below information is advice only.
18 - 35mm Hardboard Discs sold in quantities of 50/100 - usual pin size 32mm/1.25" - Use M3 Nut & Bolts
38 - 76mm Hardboard Discs sold in quantities of 10/50/100 - usual pin size 44mm/1.75" - Use M5 Nut & Bolts
M3 = 3mm centre hole for all pins and M3 nut and bolts
M5 = 5mm centre hole for M5 nut and bolts
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
The below information is advice only.
18 - 35mm Hardboard Discs sold in quantities of 50/100 - usual pin size 32mm/1.25" - Use M3 Nut & Bolts
38 - 76mm Hardboard Discs sold in quantities of 10/50/100 - usual pin size 44mm/1.75" - Use M5 Nut & Bolts
M3 = 3mm centre hole for all pins and M3 nut and bolts
M5 = 5mm centre hole for M5 nut and bolts
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
The below information is advice only.
18 - 35mm Hardboard Discs sold in quantities of 50/100 - usual pin size 32mm/1.25" - Use M3 Nut & Bolts
38 - 76mm Hardboard Discs sold in quantities of 10/50/100 - usual pin size 44mm/1.75" - Use M5 Nut & Bolts
M3 = 3mm centre hole for all pins and M3 nut and bolts
M5 = 5mm centre hole for M5 nut and bolts
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
The below information is advice only.
18 - 35mm Hardboard Discs sold in quantities of 50/100 - usual pin size 32mm/1.25" - Use M3 Nut & Bolts
38 - 76mm Hardboard Discs sold in quantities of 10/50/100 - usual pin size 44mm/1.75" - Use M5 Nut & Bolts
M3 = 3mm centre hole for all pins and M3 nut and bolts
M5 = 5mm centre hole for M5 nut and bolts
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
The below information is advice only.
18 - 35mm Hardboard Discs sold in quantities of 50/100 - usual pin size 32mm/1.25" - Use M3 Nut & Bolts
38 - 76mm Hardboard Discs sold in quantities of 10/50/100 - usual pin size 44mm/1.75" - Use M5 Nut & Bolts
M3 = 3mm centre hole for all pins and M3 nut and bolts
M5 = 5mm centre hole for M5 nut and bolts
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
The below information is advice only.
18 - 35mm Hardboard Discs sold in quantities of 50/100 - usual pin size 32mm/1.25" - Use M3 Nut & Bolts
38 - 76mm Hardboard Discs sold in quantities of 10/50/100 - usual pin size 44mm/1.75" - Use M5 Nut & Bolts
M3 = 3mm centre hole for all pins and M3 nut and bolts
M5 = 5mm centre hole for M5 nut and bolts
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
The below information is advice only.
18 - 35mm Hardboard Discs sold in quantities of 50/100 - usual pin size 32mm/1.25" - Use M3 Nut & Bolts
38 - 76mm Hardboard Discs sold in quantities of 10/50/100 - usual pin size 44mm/1.75" - Use M5 Nut & Bolts
M3 = 3mm centre hole for all pins and M3 nut and bolts
M5 = 5mm centre hole for M5 nut and bolts
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
The below information is advice only.
18 - 35mm Hardboard Discs sold in quantities of 50/100 - usual pin size 32mm/1.25" - Use M3 Nut & Bolts
38 - 76mm Hardboard Discs sold in quantities of 10/50/100 - usual pin size 44mm/1.75" - Use M5 Nut & Bolts
M3 = 3mm centre hole for all pins and M3 nut and bolts
M5 = 5mm centre hole for M5 nut and bolts
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
The below information is advice only.
18 - 35mm Hardboard Discs sold in quantities of 50/100 - usual pin size 32mm/1.25" - Use M3 Nut & Bolts
38 - 76mm Hardboard Discs sold in quantities of 10/50/100 - usual pin size 44mm/1.75" - Use M5 Nut & Bolts
M3 = 3mm centre hole for all pins and M3 nut and bolts
M5 = 5mm centre hole for M5 nut and bolts
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
The below information is advice only.
18 - 35mm Hardboard Discs sold in quantities of 50/100 - usual pin size 32mm/1.25" - Use M3 Nut & Bolts
38 - 76mm Hardboard Discs sold in quantities of 10/50/100 - usual pin size 44mm/1.75" - Use M5 Nut & Bolts
M3 = 3mm centre hole for all pins and M3 nut and bolts
M5 = 5mm centre hole for M5 nut and bolts
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
The below information is advice only.
18 - 35mm Hardboard Discs sold in quantities of 50/100 - usual pin size 32mm/1.25" - Use M3 Nut & Bolts
38 - 76mm Hardboard Discs sold in quantities of 10/50/100 - usual pin size 44mm/1.75" - Use M5 Nut & Bolts
M3 = 3mm centre hole for all pins and M3 nut and bolts
M5 = 5mm centre hole for M5 nut and bolts
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
The below information is advice only.
18 - 35mm Hardboard Discs sold in quantities of 50/100 - usual pin size 32mm/1.25" - Use M3 Nut & Bolts
38 - 76mm Hardboard Discs sold in quantities of 10/50/100 - usual pin size 44mm/1.75" - Use M5 Nut & Bolts
M3 = 3mm centre hole for all pins and M3 nut and bolts
M5 = 5mm centre hole for M5 nut and bolts
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
The below information is advice only.
18 - 35mm Hardboard Discs sold in quantities of 50/100 - usual pin size 32mm/1.25" - Use M3 Nut & Bolts
38 - 76mm Hardboard Discs sold in quantities of 10/50/100 - usual pin size 44mm/1.75" - Use M5 Nut & Bolts
M3 = 3mm centre hole for all pins and M3 nut and bolts
M5 = 5mm centre hole for M5 nut and bolts
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
The below information is advice only.
18 - 35mm Hardboard Discs sold in quantities of 50/100 - usual pin size 32mm/1.25" - Use M3 Nut & Bolts
38 - 76mm Hardboard Discs sold in quantities of 10/50/100 - usual pin size 44mm/1.75" - Use M5 Nut & Bolts
M3 = 3mm centre hole for all pins and M3 nut and bolts
M5 = 5mm centre hole for M5 nut and bolts
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
The below information is advice only.
18 - 35mm Hardboard Discs sold in quantities of 50/100 - usual pin size 32mm/1.25" - Use M3 Nut & Bolts
38 - 76mm Hardboard Discs sold in quantities of 10/50/100 - usual pin size 44mm/1.75" - Use M5 Nut & Bolts
M3 = 3mm centre hole for all pins and M3 nut and bolts
M5 = 5mm centre hole for M5 nut and bolts
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
The below information is advice only.
18 - 35mm Hardboard Discs sold in quantities of 50/100 - usual pin size 32mm/1.25" - Use M3 Nut & Bolts
38 - 76mm Hardboard Discs sold in quantities of 10/50/100 - usual pin size 44mm/1.75" - Use M5 Nut & Bolts
M3 = 3mm centre hole for all pins and M3 nut and bolts
M5 = 5mm centre hole for M5 nut and bolts
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
The below information is advice only.
18 - 35mm Hardboard Discs sold in quantities of 50/100 - usual pin size 32mm/1.25" - Use M3 Nut & Bolts
38 - 76mm Hardboard Discs sold in quantities of 10/50/100 - usual pin size 44mm/1.75" - Use M5 Nut & Bolts
M3 = 3mm centre hole for all pins and M3 nut and bolts
M5 = 5mm centre hole for M5 nut and bolts
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
The below information is advice only.
18 - 35mm Hardboard Discs sold in quantities of 50/100 - usual pin size 32mm/1.25" - Use M3 Nut & Bolts
38 - 76mm Hardboard Discs sold in quantities of 10/50/100 - usual pin size 44mm/1.75" - Use M5 Nut & Bolts
M3 = 3mm centre hole for all pins and M3 nut and bolts
M5 = 5mm centre hole for M5 nut and bolts
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
The below information is advice only.
18 - 35mm Hardboard Discs sold in quantities of 50/100 - usual pin size 32mm/1.25" - Use M3 Nut & Bolts
38 - 76mm Hardboard Discs sold in quantities of 10/50/100 - usual pin size 44mm/1.75" - Use M5 Nut & Bolts
M3 = 3mm centre hole for all pins and M3 nut and bolts
M5 = 5mm centre hole for M5 nut and bolts
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
The below information is advice only.
18 - 35mm Hardboard Discs sold in quantities of 50/100 - usual pin size 32mm/1.25" - Use M3 Nut & Bolts
38 - 76mm Hardboard Discs sold in quantities of 10/50/100 - usual pin size 44mm/1.75" - Use M5 Nut & Bolts
M3 = 3mm centre hole for all pins and M3 nut and bolts
M5 = 5mm centre hole for M5 nut and bolts
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
The below information is advice only.
18 - 35mm Hardboard Discs sold in quantities of 50/100 - usual pin size 32mm/1.25" - Use M3 Nut & Bolts
38 - 76mm Hardboard Discs sold in quantities of 10/50/100 - usual pin size 44mm/1.75" - Use M5 Nut & Bolts
M3 = 3mm centre hole for all pins and M3 nut and bolts
M5 = 5mm centre hole for M5 nut and bolts
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
The below information is advice only.
18 - 35mm Hardboard Discs sold in quantities of 50/100 - usual pin size 32mm/1.25" - Use M3 Nut & Bolts
38 - 76mm Hardboard Discs sold in quantities of 10/50/100 - usual pin size 44mm/1.75" - Use M5 Nut & Bolts
M3 = 3mm centre hole for all pins and M3 nut and bolts
M5 = 5mm centre hole for M5 nut and bolts
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
The below information is advice only.
18 - 35mm Hardboard Discs sold in quantities of 50/100 - usual pin size 32mm/1.25" - Use M3 Nut & Bolts
38 - 76mm Hardboard Discs sold in quantities of 10/50/100 - usual pin size 44mm/1.75" - Use M5 Nut & Bolts
M3 = 3mm centre hole for all pins and M3 nut and bolts
M5 = 5mm centre hole for M5 nut and bolts
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
The below information is advice only.
18 - 35mm Hardboard Discs sold in quantities of 50/100 - usual pin size 32mm/1.25" - Use M3 Nut & Bolts
38 - 76mm Hardboard Discs sold in quantities of 10/50/100 - usual pin size 44mm/1.75" - Use M5 Nut & Bolts
M3 = 3mm centre hole for all pins and M3 nut and bolts
M5 = 5mm centre hole for M5 nut and bolts
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
The below information is advice only.
18 - 35mm Hardboard Discs sold in quantities of 50/100 - usual pin size 32mm/1.25" - Use M3 Nut & Bolts
38 - 76mm Hardboard Discs sold in quantities of 10/50/100 - usual pin size 44mm/1.75" - Use M5 Nut & Bolts
M3 = 3mm centre hole for all pins and M3 nut and bolts
M5 = 5mm centre hole for M5 nut and bolts
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
The below information is advice only.
18 - 35mm Hardboard Discs sold in quantities of 50/100 - usual pin size 32mm/1.25" - Use M3 Nut & Bolts
38 - 76mm Hardboard Discs sold in quantities of 10/50/100 - usual pin size 44mm/1.75" - Use M5 Nut & Bolts
M3 = 3mm centre hole for all pins and M3 nut and bolts
M5 = 5mm centre hole for M5 nut and bolts
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
The below information is advice only.
18 - 35mm Hardboard Discs sold in quantities of 50/100 - usual pin size 32mm/1.25" - Use M3 Nut & Bolts
38 - 76mm Hardboard Discs sold in quantities of 10/50/100 - usual pin size 44mm/1.75" - Use M5 Nut & Bolts
M3 = 3mm centre hole for all pins and M3 nut and bolts
M5 = 5mm centre hole for M5 nut and bolts
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
The below information is advice only.
18 - 35mm Hardboard Discs sold in quantities of 50/100 - usual pin size 32mm/1.25" - Use M3 Nut & Bolts
38 - 76mm Hardboard Discs sold in quantities of 10/50/100 - usual pin size 44mm/1.75" - Use M5 Nut & Bolts
M3 = 3mm centre hole for all pins and M3 nut and bolts
M5 = 5mm centre hole for M5 nut and bolts
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
The below information is advice only.
18 - 35mm Hardboard Discs sold in quantities of 50/100 - usual pin size 32mm/1.25" - Use M3 Nut & Bolts
38 - 76mm Hardboard Discs sold in quantities of 10/50/100 - usual pin size 44mm/1.75" - Use M5 Nut & Bolts
M3 = 3mm centre hole for all pins and M3 nut and bolts
M5 = 5mm centre hole for M5 nut and bolts
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
The below information is advice only.
18 - 35mm Hardboard Discs sold in quantities of 50/100 - usual pin size 32mm/1.25" - Use M3 Nut & Bolts
38 - 76mm Hardboard Discs sold in quantities of 10/50/100 - usual pin size 44mm/1.75" - Use M5 Nut & Bolts
M3 = 3mm centre hole for all pins and M3 nut and bolts
M5 = 5mm centre hole for M5 nut and bolts
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
The below information is advice only.
18 - 35mm Hardboard Discs sold in quantities of 50/100 - usual pin size 32mm/1.25" - Use M3 Nut & Bolts
38 - 76mm Hardboard Discs sold in quantities of 10/50/100 - usual pin size 44mm/1.75" - Use M5 Nut & Bolts
M3 = 3mm centre hole for all pins and M3 nut and bolts
M5 = 5mm centre hole for M5 nut and bolts
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
The below information is advice only.
18 - 35mm Hardboard Discs sold in quantities of 50/100 - usual pin size 32mm/1.25" - Use M3 Nut & Bolts
38 - 76mm Hardboard Discs sold in quantities of 10/50/100 - usual pin size 44mm/1.75" - Use M5 Nut & Bolts
M3 = 3mm centre hole for all pins and M3 nut and bolts
M5 = 5mm centre hole for M5 nut and bolts
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
The below information is advice only.
18 - 35mm Hardboard Discs sold in quantities of 50/100 - usual pin size 32mm/1.25" - Use M3 Nut & Bolts
38 - 76mm Hardboard Discs sold in quantities of 10/50/100 - usual pin size 44mm/1.75" - Use M5 Nut & Bolts
M3 = 3mm centre hole for all pins and M3 nut and bolts
M5 = 5mm centre hole for M5 nut and bolts
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
The below information is advice only.
18 - 35mm Hardboard Discs sold in quantities of 50/100 - usual pin size 32mm/1.25" - Use M3 Nut & Bolts
38 - 76mm Hardboard Discs sold in quantities of 10/50/100 - usual pin size 44mm/1.75" - Use M5 Nut & Bolts
M3 = 3mm centre hole for all pins and M3 nut and bolts
M5 = 5mm centre hole for M5 nut and bolts
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
The below information is advice only.
18 - 35mm Hardboard Discs sold in quantities of 50/100 - usual pin size 32mm/1.25" - Use M3 Nut & Bolts
38 - 76mm Hardboard Discs sold in quantities of 10/50/100 - usual pin size 44mm/1.75" - Use M5 Nut & Bolts
M3 = 3mm centre hole for all pins and M3 nut and bolts
M5 = 5mm centre hole for M5 nut and bolts
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
The below information is advice only.
18 - 35mm Hardboard Discs sold in quantities of 50/100 - usual pin size 32mm/1.25" - Use M3 Nut & Bolts
38 - 76mm Hardboard Discs sold in quantities of 10/50/100 - usual pin size 44mm/1.75" - Use M5 Nut & Bolts
M3 = 3mm centre hole for all pins and M3 nut and bolts
M5 = 5mm centre hole for M5 nut and bolts
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
The below information is advice only.
18 - 35mm Hardboard Discs sold in quantities of 50/100 - usual pin size 32mm/1.25" - Use M3 Nut & Bolts
38 - 76mm Hardboard Discs sold in quantities of 10/50/100 - usual pin size 44mm/1.75" - Use M5 Nut & Bolts
M3 = 3mm centre hole for all pins and M3 nut and bolts
M5 = 5mm centre hole for M5 nut and bolts
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
The below information is advice only.
18 - 35mm Hardboard Discs sold in quantities of 50/100 - usual pin size 32mm/1.25" - Use M3 Nut & Bolts
38 - 76mm Hardboard Discs sold in quantities of 10/50/100 - usual pin size 44mm/1.75" - Use M5 Nut & Bolts
M3 = 3mm centre hole for all pins and M3 nut and bolts
M5 = 5mm centre hole for M5 nut and bolts
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
The below information is advice only.
18 - 35mm Hardboard Discs sold in quantities of 50/100 - usual pin size 32mm/1.25" - Use M3 Nut & Bolts
38 - 76mm Hardboard Discs sold in quantities of 10/50/100 - usual pin size 44mm/1.75" - Use M5 Nut & Bolts
M3 = 3mm centre hole for all pins and M3 nut and bolts
M5 = 5mm centre hole for M5 nut and bolts
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
The below information is advice only.
18 - 35mm Hardboard Discs sold in quantities of 50/100 - usual pin size 32mm/1.25" - Use M3 Nut & Bolts
38 - 76mm Hardboard Discs sold in quantities of 10/50/100 - usual pin size 44mm/1.75" - Use M5 Nut & Bolts
M3 = 3mm centre hole for all pins and M3 nut and bolts
M5 = 5mm centre hole for M5 nut and bolts
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
The below information is advice only.
18 - 35mm Hardboard Discs sold in quantities of 50/100 - usual pin size 32mm/1.25" - Use M3 Nut & Bolts
38 - 76mm Hardboard Discs sold in quantities of 10/50/100 - usual pin size 44mm/1.75" - Use M5 Nut & Bolts
M3 = 3mm centre hole for all pins and M3 nut and bolts
M5 = 5mm centre hole for M5 nut and bolts
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
